Or call 610-863-6300
<< back to products

Treatment Strategy

  • Source Structure

Application Use

  • Industrial In-plant
  • Architectural Walls/Ceilings
  • OEM
  • HVAC


Vibration Damping Sheets

Self-Adhesive Pads Used For Sound And Vibration Damping On Metal Panels And Other Continuously Resonating Surfaces

OEM die cut parts using HUSH DAMP™ type EVDS-100 damping sheet. Industrial in-plant application with EVDS-100 applied to outside surfaces of two material feed chutes.
Advantages: Applications:
  • Easy to apply peel and stick backing
  • Resistant to water and mineral oils
  • High acoustic loss factor ratings up to 0.20
  • Non-toxic formulation
  • Improves fatigue life and safety factor of treated surfaces
  • Can be combined with absorbers/composites
  • Available in sheet or pre-fabricated die cut parts for OEM production runs
  • Meets UL 94/HBF Flammability
  • Increases panel transmission loss
  • Flexible sheets can conform to curved surfaces
  • Aggressive 4 mil unsupported acrylic adhesive system assure permanent bond
  • Floor and walls in new commercial building construction
  • Doors, bins and panels
  • Feed chutes and hoppers
  • Machinery and belt guards
  • Ventilation ducts
  • Structural isolation for fitness centers, dance floors, tracks, bowling alleys, etc.
  • Buses and railroad cars
  • Ships and boats
  • Machinery enclosures and cabinets
  • Parts tumblers
  • Fan and blower housings
  • Piping systems (thin wall)
  • Other OEM applications


About HUSH DAMP™ Sheet Materials

BRD HUSH DAMP™ vibration damping pads are supplied in sheets approximately 0.060" thick with a peel and stick pressure sensitive adhesive backing.  When applied to metal, plastic, wood, glass and other rigid surfaces, continuous resonance and "shell ring" from impact are reduced thus lowering overall dB levels.  Vibrational energy is converted to heat instead of airborne acoustic energy.  Type EVDS-100 material is available in 54" x 40" sheets that can easily be cut with scissors, a utility knife or steel dies for production runs.  Type EVDS-200 has adhesive on both sides to form constrained layer damping systems.  EVDS-200 sandwiched between two layers of wood, steel or gypsum board creates a family of damped composites with elevated STC ratings.


EVDS-100 Specifications:  Composite Loss Factors

Thickness: 0.060"
Weight: 0.33 lbs./ft.2
Sheet Size: 54" x 40"
Color: Dark gray
Temp. Range: -22°F to 248°F
Storage Life: Max. 6 months
Fire Classification: Meets FM VSS 302
  Approved to UL 94 HBF
Chemical Resistance: Resistant to water and mineral oils
Adhesive: Peel strength 8.6 lbs/in. on steel
  at 86°F
Heat Conductivity: 0.76 BTU-in/ft.2 x °F